Connect with us

Guide

How to get Ursaluna in Pokémon Legends: Arceus

Published

on

How to get Ursaluna in Pokémon Legends: Arceus

In this guide, we explain how to get Ursaluna, the new evolution of Ursaring in Pokémon Legends: Arceus for Nintendo Switch.

If you are playing Pokémon Legends: Arceus, the new installment of this popular saga for Nintendo Switch, it is very likely that you are already working on completing the Pokédex. After all, it is the main objective of the adventure!

This means that you will have to train many Pokémon to level up, but also that you will have to carry out certain special actions to get certain Pokémon to evolve. One such Pokémon that requires special actions is Ursaluna, the new evolution of Ursaring in the Hisui region.

You probably know Ursaluna because it’s one of the Pokémon mounts you get throughout the story. But as with Wyrdeer and the rest of Pokémonturas, being able to ride the creature does not mean that it belongs to us or unlock its entry in the Pokédex.

For that, you have to follow some very specific steps… So specific that we could be talking about one of the most complicated evolutions to obtain from Pokémon Legends: Arceus. But that’s what we’re here for today!

The first thing, obviously, is to get Ursaring. To do this you have two options: the first is to get a Teddiursa and raise it to level 30. The second is to catch an Ursaring directly; You will find it in the Crimson Pantanal and on the Pilgrim’s Path (Ladera Corona).

The next thing is to get the item known as Mob Block. This item can be randomly unearthed in the Crimson Swamp using the Ursaluna mount’s special ability (paradoxical, we know). Simply go to the location and follow Ursaluna’s nose until you find a Peat Block.

Now comes the tricky part: you must give the Mob Block to Ursaring so that it evolves into Ursaluna, but it will only accept it on full moon nights. Yes, there is a lunar cycle in Pokémon Legends: Arceus… and you can alter it by sleeping in camps.

You don’t even need to be aware of the sky; head to a camp, interact with the bed, and select the ‘Until Night’ option. When you wake up, open the menu and see if you can use the Mob Block with Ursaring; if it shows as ‘Unsuitable’, repeat the process until it is accepted.

Guide

Dead Space: How to Get the Flamethrower

Published

on

Dead Space: How to Get the Flamethrower

There are a lot of different items as well as weapons that players will find throughout their gameplay. All weapons can be used to take down Necromorphs in some way and one of the early weapons that players can find in the game is Flamethrower.

In this guide, we’ll tell you how to get the Flamethrower in Dead Space.

Flamethrower Location

Flamethrower is one of the early weapons in Dead Space that players can get in the 3rd Chapter: Course Correction. Flamethrower can be found in the Engine Room which can be reached after players have unlocked Airlock 2.

Getting the Flamethrower

After starting the Centrifuge, go back to the Control Room through the Decontamination Chamber to get to the Zero-Gravity area. You can use the Locator to easily get to the location. Once you are in the zero-gravity area, you need to use Stasis on the spinning fans and go between the fans. Use the breaker and activate Airlock 2 to open the other door. Now, go back on the platform and open the airlock.

Shoot the glowing orange part in front to explode the tentacle and go to the Engine Room. As you go inside the Engine Room, you will get the Flamethrower.

Equip Flamethrower

After picking up the Flamethrower, it will be stored in your inventory. You will have to equip the Flamethrower in order to use it. To equip the Flamethrower, follow the following steps.

  • Press the Triangle Button to open the Inventory.
  • Select the Flamethrower and select it to see the Equip Option.
  • Press the X Button to equip it and then select the space that you want to allocate to the Flamethrower.

Flamethrower will be equipped and you can press the Directional Buttons to pull out the weapons that are currently equipped in the slots.

Continue Reading

Guide

Dead Space: Chapter 3: Course Correction – Walkthrough

Published

on

Dead Space: Chapter 3: Course Correction – Walkthrough

In this guide, we’ll be covering the third chapter (Course Correction) of Dead Space.

Course Correction – Walkthrough

The Third Chapter will begin at the Main Hangar Bay of USG Ishimura. You will get to use your suit’s thrusters to fly through the area. Use the Locator to reach the Engineering Deck before your oxygen tank runs out. Once you are in the Engineering Deck, use the Control Console to see the Diagnostic Report. You will have to refuel the Engines in the South, refuel the Engines in the North, and fix the Centrifuge.

At first, you will have to refuel the Engines in the South. Use the Locator and follow it to reach the Refueling Control Stations. Stay on the left side and you will see a platform ahead. Use the Kinesis Module to pull the Platform towards you. Use the Switch to travel to the other side. Kill the Necromorphs and head up the stairs to get the Fuel Station Keycard. Now, go back down to use the Keycard to enter the Fuel Management Room.

You need to use the Circuit Breaker on the right side and turn on the South Refuel Station. You can turn on another function through Circuit Breaker. If you turn on the life support, you will not have to worry about your oxygen level. However, the lights will go dark. Choose the one that you are comfortable with and then use the Locator to reach the platform with the refueling system. Once there, use the Kinesis Module to lower the lever to fill the fuel in the South Engine. Now, go back to the Platform by which you came here. Use the Locator if you are having trouble finding the platform.

Activate the platform and go to the other side to refuel the North Engine. Use the Locator to reach the refueling system of North Engine. Once again, use the Kinesis Module to lower the lever to refuel the North Engine. Now, you need to restart the Centrifuge. Go back to the Control Room to reach the elevator that will take you down to the Centrifuge. Before you go ahead into the Centrifuge area, make sure to grab some loot in the storage room when you come down from the elevator.

Make your way into the Decontamination Chamber to start the Decontamination Sequence. You will have to wait for the sequence to complete until then, you will get to kill some enemies. Once the sequence is completed, leave the decontamination chamber from the opposite door and enter the Centrifuge. Go to the right side to reach the zero-gravity area. You will have to attach two generator modules to the mechanism in the middle.

In order to join them, you will have to use Stasis at the spinning part of the module and then use the Kinesis Module to attach them to the mechanism. Attach both of the generator modules one by one and then go to the Centrifuge Control Panel to start the Centrifuge. Now, head down by using the elevator and go along the path but be careful of the spinning arm of the Centrifuge. Make sure to stay on each space in the path to easily reach the other elevator. Use the Elevator to go up and enter the door to exit the vacuum.

You will be grabbed by a Tentacle and you will have to shoot the glowing orange part of the Tentacle to explode the tentacle into pieces. Now, go back to the Control Room through the Decontamination Chamber to get to the Zero-Gravity area. You can use the Locator to easily get to the location. Once you are in the zero-gravity area, you need to use Stasis on the spinning fans and go between the fans. Use the breaker and activate Airlock 2 to open the other door. Now, go back on the platform and open the airlock.

Shoot the glowing orange part in front to explode the tentacle and go to the Engine Room. As you go inside the Engine Room, you will get the Flamethrower. To use the Flamethrower, you will have to equip it in one of the slots. Go ahead on the path to reach the other side. Go to the elevator and use it to go down to the lower level. Go right and shoot the orange part of the tentacle to clear the path. Go ahead along the path to get to the elevator. Use the elevator to go further down. Here you will fight a new type of Necromorph. Kill the enemy from the range because it will explode and then use the Flamethrower to take out the mini-necromorphs.

Now, use the Stasis on the door to get through it. Kill the enemies on the way and then go inside the Engine Room. Clear the room with the enemies and then go to the end of the room to see the red socket. Go up the ramp in front of the socket and you will find the Power Cell. Use the Kinesis Module to place the Power Cell inside the Red Socket. The Ignition System will be initiated and you need to go to the control panel up on the first ramp. When the engines are ready, interact with the control panel to confirm the ignition.

After that, you need to return to the Tram Station. Use the Locator to go through the Control Room and reach the Tram Station. Once you are at the Tram Station, board the tram and select the Bridge as your destination. Getting to the Bridge will conclude the third chapter and the fourth chapter will start.

Continue Reading

Guide

Dead Space: How to Get Shock Pads

Published

on

Getting Shock Pads

Dead Space has a lot of different puzzles in the game that players will have to solve in order to progress through the game. In the second chapter of the game, players will have to make an explosive charge and use it to open the path to the Emergency Room. To make the charge players will have to get the Shock Pads.

In this guide, we’ll tell you how to get the Shock Pads in Dead Space.

Shock Pads Location

The Shock Pads for the Hydrazine Explosive Charge can be found in the Limb Simulation Therapy. Players will be able to get to the Limb Simulation Therapy by reaching the Main Lab. Main Lab can only be reached once players have obtained the Hydrazine Tank.

Getting Shock Pads

Once you have obtained Hydrazine Tank, go back to the vacuum area and you will get to use the booster in the vacuum area as well. Go up in the vacuum area and go to the Coolant Pipelines. Make your way to the Security Station by following the Locator and then you will get to Research Wing where you will get to use Stasis on a door to cross through it.

Go into the Main Lab and the quarantine will come back online. You will have to kill the Necromorphs and then use the elevator to get to the lower level. There will be some more Necromorphs so, kill them as well. The quarantine will be disabled and all the closed doors will be opened.

Use the Locator and follow it to reach the Biological Prosthetic. You will get to kill a new type of enemy here. Kill the enemy and then go up the elevator and kill a couple of more. Go through the door to reach the Limb Simulation Therapy. Here you will find the Shock Pads. Switch off the shock Pads by using the Circuit Breaker and activate the door to grab the Shock Pads.

After obtaining the Shock Pads, you will have both the items needed to make the charge. You will have to return to the Security Station by following the Locator and plant the Explosive charge to make the path to reach the Emergency Room.

Continue Reading
Manage Cookie Settings