Connect with us

Guide

Deliver Us Mars: How to Fix the Connection of MPT of ARK Labos

Published

on

Deliver Us Mars: How to Fix the Connection of MPT of ARK Labos

Deliver Us Mars has many different puzzles that will test you but some of them are very complicated as well. In the Third Chapter, you will have to restore the power of ARK Labos. In order to do that, you will have to manually power up the connections of MPT.

In this guide, we’ll tell you how to fix the connections of MPT of ARK Labos in Deliver Us Mars.

Fixing the Connection of MPT of ARK Labos

Once you are in the room, you will see 8 Receiver Points attached to a mechanism that is used to power up Labos. You will have to put the Beam of STREAME techs on all of the Receiver Points. However, if you look above each Receiver Point, you will see a number of dots. It means that the current Receiver must get power at a certain number so, you will have to power them up in a specific order.

Go to the Receiver Point with 1 dot above it and then look directly behind. You will see two STREAME techs. You need to place the Beam of one STREAME on the Receiver Point with 1 dot. After placing it, look behind and you will see the lock that can be used by AYLA. Use Ayla or interact with the lock to open the door. Now, go through it and cut the locks on the door on the right side. You will see cylinders and lightning in the other room attached to it. You need to destroy the cylinders to take out the lightning so, you will not get electrocuted.

Fixing the Connection of MPT of ARK Labos

You need to destroy each one by staying at a safe distance because if you get too close, you will get shocked and if you destroy it from a short distance, you will get hurt by the explosion. After destroying all the cylinders, cut the locks on the door on the right side of the room to get through it. You will see two more STREAME techs in the room. Before getting to connect them, open the door in front of AYLA. Now, connect one STREAME tech to the Receiver Point with 2 dots and the other STREAME tech to the Receiver Point with 3 dots.

Now, you need to use AYLA by pressing the C button and go through the ventilation which is in the front of the door lock in room B. Go through the vents to reach the next room and open it by using AYLA. Now, connect the STREAME tech beam to the Receiver Point with 4 dots and the STREAME tech to the Receiver Point with 5 dots. Now, go ahead into the room and press the button to open the next door. Use the laser to cut the lock of the door and connect the STREAME tech beam to the Receiver Point with 6 dots and the other STREAME tech beam to the Receiver Point with 7 dots.

Now, go back to room A from where you connected 1 dot Receiver Point and connect the other STREAME tech beam to the Receiver Point with 8 dots. Now, go back up to the bridge and interact with the Terminal. After that, you need to interact with the system in the outer bridge area to complete the power restoration of ARK Labos.

I enjoy playing games, and gaming is a passion of mine. Among my favorite games are Tears of the Kingdom, GTA, and Cyberpunk.

Manage Cookie Settings