Connect with us

Guide

LEGO Star Wars: The Skywalker Saga: Episode 2: Attack of the Clones: Level 3: Droid Factory Frenzy

Published

on

LEGO Star Wars: The Skywalker Saga: Episode 2: Attack of the Clones: Level 3: Droid Factory Frenzy

To unlock this challenge level, you have to play through certain levels first. After you have completed The Hunt for Jango level, you’ll continue as the Anakin Skywalker and you have to complete his level to continue the story.

Nightmares

Anakin Skywalker had a nightmare about his mother that she is in trouble and she needs her help. Padme will also come with Anakin for help. You have to get to the ship so, just follow the yellow icons and you’ll reach the Theed Hangar, from there you’ll interact with the ship and go to Mos Espa location in Planet Tatooine.

LEGO Star Wars: The Skywalker Saga: Episode 2: Attack of the Clones: Level 3: Droid Factory Frenzy

After you have landed in Mos Espa, follow the yellow icons and you’ll see Watto who was once your owner. Go and interact with him to continue the story. He will tell you about your mother that he sold her to a Moisture Farmer named Lars in the land of Moisture Vaporators many years ago. Go back and follow the yellow icons to transport the planet, and take a ride to Judland Wastes.

LEGO Star Wars: The Skywalker Saga: Episode 2: Attack of the Clones: Level 3: Droid Factory Frenzy

After you reach there, follow the yellow icons and you’ll find C-3PO which you created in the shop of Watto, you’ll also meet Lars and Cliegg Lars who married Shmi. He will tell you that Tusken Raiders took her when she was returning home. Now you have to go and save your mother. Just follow the yellow icons and you’ll reach a Tusken place and there’ll be a blue icon for continuing the story, interact with it to continue.

The Tusken Raid

It will be just a cutscene where Anakin Skywalker found the party of Tusken Raiders and beat them and he found out that he has lost his mother. After this, he returns to Padme and Obi-Wan sends a message that he is in trouble and Padme asks Anakin to come to help Obi-Wan with her.

Distress Signal

After the cutscene, you are in space and you’ll see an icon of traveling to Geonosis Space, travel there, and when you reach the Geonosis Space go to the Stalgasin Hive location on the planet.

LEGO Star Wars: The Skywalker Saga: Episode 2: Attack of the Clones: Level 3: Droid Factory Frenzy

After you landed at the location, follow the yellow icons and you’ll reach a closed bunker. Open the bunker gate with Force power, jump down and start the next level which will be Droid Factory Frenzy.

Droid Factory Frenzy

As you start this level you go inside the Droid Factory to locate the Obi-Wan to help him. You have to make your way through this factory to find Obi-Wan. Defend yourself from the guards of Geonosis and then C-3PO and R2-D2 will come inside the droid factory for help. You have to power up the power cells in order to open the gate. Switch to C-3PO and he will create a small bridge to the power cells area and create a machine for the R2-D2 to use it to charge the power cells. There will be 2 power cells but only 1 machine then switch to Anakin and use the Force power to remove one power cell and charge it with the second power cell and put it back. This will open the gate and you have to jump down on the conveyer belt.

Keep going ahead on the conveyer belt and fight the Droids and Geonosis guards on the conveyer belt. The doors ahead will be downed and you have to switch to R2-D2 to activate the doors again. Make your way to the pointed direction and switch to C-3PO and make a terminal for the R2-D2 to use in order to activate the doors again. After you have activated the doors again, switch back to Anakin and climb up the door to go up. Switch to Padme and access the terminal to unlock the further path.

Fight with the Droids and Geonosis guards on the way and at the end of the conveyer belt take a zip line to the other side. Make two levers to power up the secret door of the factory. After this pull down the first lever and the second one will be pulled down by your companion and the door will be opened. As Padme is about to go in a Geonosis guard will come and push her to the lava filling belt and you have to save her before she reaches the lava filling machine. Defeat the droids and make your way to the terminal of the lava filling machine then switch to R2-D2 and grapple to cross the distance and access the terminal and close the machine. As you free her a cutscene will start in which Jango Fett will come and capture us.

When the cutscene ends you’ll unlock the Free Play mode of the Droid Factory Frenzy level and you can play it whenever you want.

Check our complete guide for Lego Star Wars: The Skywalker Saga here.

Guide

Crime Boss: Rockay City – How to Recruit Team/Allies

Published

on

Recruit Team

You will have to take down different Gang territories in Crime Boss: Rockay City which will require you to have allies on your back. If you are playing the campaign alone then you will have to retrieve the AI Allies in your missions to help you out. Without the Allies, you will not be able to take down the opposition gang members from interfering in your becoming “The King” vision of Rockay City.

In this guide, we’ll tell you how to Recruit Allies in Crime Boss: Rockay City.

Recruiting Team/Allies

Crime Boss: Rockay City has a Co-op feature in which players can play with other real players to take down the other gangsters in the city. Playing with your friends will help you a lot more in missions of taking the turfs from the gangs or doing the robberies. However, if you are playing alone, you will have to recruit a team of Ais. There are a number of Ais that you can recruit in your team to help you out in the missions of the campaign but it will cost you a lot of money.

For the main missions like attacking the turfs or robbing a store or bank, you will be required to have at least four players. If you are alone, you will be playing as an AI or the main protagonist, Travis Baker. You will have to keep alive Travis Baker because if he dies, your run will be over and you will have to restart the run from the start.

Now, in order to recruit the Team, you will have to follow the following steps.

  • Go to the TEAM Tab when you are in your safe house.
  • Select the available characters in the TEAM menu.
  • Now, you will have to hire the rest of the Team from the available characters for hire menu.
  • Each character will cost a certain amount of money.
  • Select the character and hold the click button on it to hire.
  • You can also refresh the characters but it will cost extra money and each time you refresh the characters, the money will increase.
Hire AIs in TEAM Tab

Once you have the team of 4 characters ready for a mission, you will see the Start Mission option unlock at the bottom of the screen. Keep in mind, you cannot start the mission if your team is not filled or not ready for the mission. Sometimes, your AI Team might be away and you will have to wait for them to come back for which you have to end the day as well.

Continue Reading

Guide

Terra Nil – How to Create the Forest Biome

Published

on

Forest Biome

There are a number of biomes that players will have to repopulate on each map of the game. Biomes are the main goals of each map and after completing the initial goals, you will unlock the biome goals that you will have to complete. One of the biomes that players will have to create is the Forest which is essential for calling certain animals.

In this guide, we’ll tell you how to create the Forest Biome in Terra Nil.

Creating the Forest Biome

The Forest Biome is among the trickiest biomes to create because it can only be populated on Nutritious Ash Tiles. As the map’s soil will be dull and when you clean the soil, it will not contain any Nutrition. However, if you planted some Fynbos Flowers, it will spread some nutrition on the tiles that can be used to turn them into a forest. Now, in order to plant the Fynbos Flowers, you will have to create Fynbos Biome which can only be done by Beehive tool.

Once you have made enough of Fynbos Biome, it will unlock a new tool named “Solar Amplifier”. Solar Amplifier is one of the Tier 2 Buildings and it will cost 30 Leaves to plant. It needs electricity to work so, you will have to place it in the vacancy of the Turbine. Make sure that the Turbine is also near the Fynbos Biome so, you can target it when the Solar Amplifier is installed.

Click the Solar Amplifier and then select the area of the Fynbos Biome to start a fire. After selecting the area where you want to start a fire, it will turn the Fynbos Biome and the near area of the biome into Ash Tiles and you will see certain tiles on which you will be able to place another tool named “Arboretum” Arboretum can be placed on the Husks of the burnt buildings and it will create a forest in its surrounding by using the Nutritious Ash Tiles.

Arboretum Tool

You can place it on all of the burnt buildings in the required area to turn it into the Forest Biome. For the rest of the area, you can use the Irrigator to grow greenery again and start installing the other buildings.

Continue Reading

Guide

Terra Nil – How to Create Wetlands Biome

Published

on

Wetlands Biome

The Wetlands Biome is one of the biomes that players will have to repopulate on different maps of the game. As you complete the starting tasks of the map, you will unlock new quests of populating the map with a certain percentage of different biomes.

In this guide, we’ll tell you how to create the Wetlands Biome in Terra Nil.

Creating Wetlands Biome

The Wetlands Biome can only be repopulated near the water area and it should be on a low level. Meaning, if there is a tile that is near the water but the surface is higher, then the Wetlands will not be able to populate there. You can only populate the Wetlands Biome on a low level near the Water. In order to start creating the Wetlands Biome, you will be required a tool named “Hydroponium”. Players will have to unlock the Hydroponium tool either by completing the starting tasks on the game or growing greenery on almost all of the map.

When you unlock the tasks for biomes, you will also unlock several tools under Tier 2 Buildings. The starting tools will only show under the Tier 1 Buildings which can be seen by pressing the 1 Key on the Keyboard. In order to view the Tier 2 Buildings, press the 2 Button on the Keyboard. The Tier 2 Buildings are specifically for the biomes and you will unlock Hydroponium under Tier 2 buildings.

Hydroponium Tool

The Hydroponium Tool can only be planted on Irrigator which is on a low level near the water. Now, if you have placed some of the Irrigator near the water on a low level, then you can place the Hydroponium on the Irrigator to start turning the Green Land into a Wetlands Biome. It will cover a certain area in the Wetlands Biome. The Hydroponium tool costs 50 Leaves and if you don’t have an Irrigator on a low level near the water, then you will have to plant some irrigator tools near the water on the map. After that, place the required number of Hydroponium tools on Irrigator to complete the Wetlands Biome task.

Continue Reading
Manage Cookie Settings