Connect with us

Guide

Raft: The Final Chapter: All Blueprints At Varuna Point

Published

on

Raft: The Final Chapter: All Blueprints At Varuna Point

Raft’s 3rd chapter has all new locations on the world map that players can explore and find new items. One of the new locations in the 3rd chapter is Varuna Point, a high building with a crane on top of it. Players will reach this place by following the story of the 3rd chapter. Players can make new machines by getting a blueprint of those machines and the 3rd chapter has a lot of new machines.

In this guide, we’ll tell you all the Blueprints that you can find at Varuna Point.

All Blueprints at Varuna Point

There are 4 Blueprints at Varuna Point that players can collect. The locations of the Blueprints are the following.

Electric Grill Blueprint

The Electric Grill Blueprint can be found up on the crane. To get up on the crane you need to get on top of the building, then go up the ladder and you’ll see the control box of the crane. Go up the second ladder and go ahead past the ladder and in the end, you’ll see some electronic parts with Electric Grill Blueprint.

All Blueprints at Varuna Point

Advanced Headlight Blueprint

The Advanced Headlight Blueprint is inside the building under the ocean inside the Motherlode location. You have to find the Motherlode Key and go inside the gate using the key. You need to make your way through the area and you’ll find the Blueprint on the table near the big boxes.

Advanced Headlight Blueprint

Windturbine Blueprint

After killing the Rhino Shark, you’ll get access to the office above. Go up through the hole and swim to the right side and up the stairs. Go into the next room and the blueprint will be on a desk.

Windturbine Blueprint

Advanced Battery Blueprint

After you’ve gotten the crane key, return to the control box on the crane and use the crane. The crane will throw down junk on the lower building opening up the way to go down in the building. Use the zipline from the crane to the building and you’ll reach an office. Blueprint will be on the table in the office.

Advanced Battery Blueprint

Guide

Monster Hunter Rise Sunbreak: Best Early Great Sword Build

Published

on

Monster Hunter Rise Sunbreak: Best Early Great Sword Build

The Great Swords are the massive blades that deal overwhelming damage to the monsters with their strikes. Great Swords can also be used to guard against some of the opponent’s attacks. The switch skill attack of this weapon allows you to unleash a stream of powerful slashes. Its silkbind attack lets you reinforce both of your arms and weapon to fend off the attacks.

In this guide, we have created the best early Great Sword build to take out the monsters.

Best Early Great Sword Build

In the build we’ll be going through the Great Sword you want to use for this build, Gear that you want to wear, Decorations, and Skills.

Weapon

The Great Sword that you want to use is Kamura Warrior Great Sword. It has a sharpness of Level Blue. It has an attack power of 250 on each hit. The attacks of this weapon will get you through Master Rank 1 & 2.

Gear

The Armor that you want to wear with this weapon is the Hunter X Armor set.

For the Head, wear the Hunter’s Helm X armor. You can create this armor with Prized Pelt x1 and Eltalite Ore x2

For the Torso, wear the Hunter’s Mail X armor. You can create this armor with Velociprey Thickhide x2 and Carbalite Ore x2.

For the Arm, wear the Hunter’s Vambraces X armor. You can create this armor with Jagras Shard x2 and Eltalite Ore x1.

For the Waist, wear the Hunter’s Coil X armor. You can create this armor with Velociprey Shard x2 and Jagras Shard x1.

For the Leg, wear the Hunter’s Greaves X armor. You can create this armor with Prized Pelt x1 and Twisted Stiffbone x2.

Decorations

You need to put the following jewels on the armor pieces.

  • Charger Jewel Level 2 on Hunter’s Helm X.
  • Steadfast Jewel Level 1 on Hunter’s Mail X.
  • Charger Jewel Level 2 on Hunter’s Vambraces X.
  • Steadfast Jewel x2 Level 1 on Hunter’s Coil X.
  • Sheath Jewel Level 2 on Hunter’s Greaves X.

Skills

You need to equip the following skills for this build.

  • Attack Boost Level 5
  • Item Prolonger Level 3
  • Handicraft Level 3
  • Quick Sheath Level 3
  • Stun Resistance Level 3
  • Focus Level 3
  • Ammo up Level 1

After equipping the skills and putting jewels on the armor, Great Sword’s defense will go up to 410 and you can easily tank some of the hits.

Continue Reading

Guide

Monster Hunter Rise Sunbreak: Best Early Long Sword Build

Published

on

Monster Hunter Rise Sunbreak: Best Early Long Sword Build

Long Swords are the best weapons for preying on and counterattacking your enemies. These weapons are sharp weapons that can unleash a powerful spirit attack on the enemies. The switch skill of this weapon allows you to unleash a follow-up slash and the power of the slash increases according to the level of the spirit gauge. It also has an attack named Harvest Moon that let you cast out an Ironsilk ring and the counterattacks within this ring will deal extra damage to enemies.

In this guide, we have created the best early build of the Long Sword to take out the monsters.

Best Early Long Sword Build

In the build we’ll be going through the Long Sword you want to use for this build, Gear that you want to wear, Decorations, and Skills.

Weapon

The Long Sword that you want to use is Kamura Warrior Rapier. It has a sharpness of Level Blue. It has an attack power of 240 on each hit. The attacks of this weapon will get you through Master Rank 1 & 2.

Gear

The Armor that you want to wear with this weapon is the Hunter X Armor set.

For the Head, wear the Hunter’s Helm X armor. You can create this armor with Prized Pelt x1 and Eltalite Ore x2

For the Torso, wear the Hunter’s Mail X armor. You can create this armor with Velociprey Thickhide x2 and Carbalite Ore x2.

For the Arm, wear the Hunter’s Vambraces X armor. You can create this armor with Jagras Shard x2 and Eltalite Ore x1.

For the Waist, wear the Hunter’s Coil X armor. You can create this armor with Velociprey Shard x2 and Jagras Shard x1.

For the Leg, wear the Hunter’s Greaves X armor. You can create this armor with Prized Pelt x1 and Twisted Stiffbone x2.

Decorations

You need to put the following jewels on the armor pieces.

  • Sheath Jewel Level 2 on Hunter’s Helm X.
  • Grinder Jewel Level 1 on Hunter’s Mail X.
  • Attack Jewel Level 2 on Hunter’s Vambraces X.
  • Grinder Jewel x2 Level 1 on Hunter’s Coil X.
  • Attack Jewel Level 2 on Hunter’s Greaves X.

Skills

You need to equip the following skills for this build.

  • Attack Boost Level 7
  • Item Prolonger Level 3
  • Handicraft Level 3
  • Quick Sheath Level 3
  • Stun Resistance Level 3
  • Speed Sharpening Level 3
  • Ammo up Level 1

After equipping the skills and putting jewels on the armor, Long Sword’s defense will go up to 410 and you can easily tank some of the hits.

Continue Reading

Guide

Monster Hunter Rise Sunbreak: Best Early Game Sword & Shield Build

Published

on

Monster Hunter Rise Sunbreak: Best Early Game Sword & Shield Build

Sword and shield are the weapons that allow you to strike and block some attacks of the monsters. Swords are weapons from which you can strike quickly and swiftly. You can come up close to enemies and hit them with the Twin Blade Combo and Destroyer Oil. Destroyer Oil attack lets you use a wirebug to cover the blade with a special ointment and its effects are triggered when ignited with friction with the shield.

In this guide, we have created the best early build of Sword & Shield to take down the monsters.

Best Early Game Sword & Shield Build

In the build we’ll be going through the Sword & Shield you want to use for this build, Gear that you want to wear, Decorations, and Skills.

Weapon

The Sword & Shield that you want to use is Kamura Warrior Sword. It has a sharpness of Level Blue. It has an attack power of 250 on each hit. The attacks of this weapon will get you through Master Rank 1 & 2.

Gear

The Armor that you want to wear with this weapon is the Hunter X Armor set.

For the Head, wear the Hunter’s Helm X armor. You can create this armor with Prized Pelt x1 and Eltalite Ore x2

For the Torso, wear the Hunter’s Mail X armor. You can create this armor with Velociprey Thickhide x2 and Carbalite Ore x2.

For the Arm, wear the Hunter’s Vambraces X armor. You can create this armor with Jagras Shard x2 and Eltalite Ore x1.

For the Waist, wear the Hunter’s Coil X armor. You can create this armor with Velociprey Shard x2 and Jagras Shard x1.

For the Leg, wear the Hunter’s Greaves X armor. You can create this armor with Prized Pelt x1 and Twisted Stiffbone x2.

Decorations

You need to put the following jewels on the armor pieces.

  • Sheath Jewel Level 2 on Hunter’s Helm X.
  • Grinder Jewel Level 1 on Hunter’s Mail X.
  • Attack Jewel Level 2 on Hunter’s Vambraces X.
  • Grinder Jewel x2 Level 1 on Hunter’s Coil X.
  • Attack Jewel Level 2 on Hunter’s Greaves X.

Skills

You need to equip the following skills for this build.

  • Attack Boost Level 7
  • Item Prolonger Level 3
  • Handicraft Level 3
  • Quick Sheath Level 3
  • Stun Resistance Level 3
  • Speed Sharpening Level 3
  • Ammo up Level 1

After equipping the skills and putting jewels on the armor, Sword & Shield’s defense will go up to 410 and you can easily tank some of the hits.

Continue Reading
Manage Cookie Settings